Here are some photos of the Work-in-Progress of the HMAS Galliant, which is a Bromhead-Class Anti-Grav Attack ship (a Vulture Equivalent). This design has the same look and feel of the Valkyrie / Vendetta equal - similar deck (except with no "door-gunner" stations), same engine/tail section. The main difference is the "hull", which is considerable smaller, due to the fact that there is no troop-carring capacity. In addition, there is a nose-mounted Heavy Bolter. The Galliant will have side "wings", which will have magnetized hard-points for the mounting of either the Punisher cannons, or other weapon fit-outs (such as H/K Missiles, Rocket Pods, Las Cannons, etc.)
Side View of the HMAS Galliant, showing the smaller Hull and nose-mounted Heavy Bolter.
Top view Comparrision between the Valk/Vendetta (left) and the Vulture (Right).
Bottom view comparison between the Valk/Vendetta (left) and Vulture (right).
Back-view of the HMAS Galliant, showing the reduced hull, the rear door and the nose-mounted heavy bolter.
Detail of the Nose-Mounted Bolter. This too is magnetized.
O.K., so I've been busy. Although I lack the funds for ship's weapondry, ship's fittings and/or crew, let alone the air-assault platoon that these will be lifting, I've decided to proceed with the scratch-building portion of creating a Praetorian Air-Assault Platoon. In addition to the fully built, armed and crewed HMAS Dauntless, I have the basic deck/hulls for the platoon's other air assest. This consists of (2) Additional Valkyries / Vendettas: The HMAS Endeavour and the HMAS Fortitude, and (1) Vulture: The HMAS Galliant.
The two Valkyries side-by-side. The HMAS Fortitude has part of it's railing installed, but both are lacking the armoured wheel-house. My current plan for the arming of the transports is to have enough magnetized weapons to equip either (3) Vendettas -0r- (2) Vendetta + (1) Valkyrie (with all the various Valk configurations, so: Deck gun will be either a Las Cannon or a Multi-Las, Wing Weapons either:Rocket Pods, Hunter/Killers -or- Las Cannons).
Side View of The HMAS Endeavour.
Rear View showing the Anti-Grav panel shutters and the rear door for troop deployment (regretably it is not a nice trop down door like the actual Valk).
Not the the Valkyrie / Vendetta models are not utterly fantanstic (because they are), and in no way is offense intended towards other Praetorian Armies (such as those of the honorable Col. Gravis or Crazy Red Praetorian) that field the Valks, but to me the Valkyrie does not quite have that "Praetorian" feel to it. Just too high-tech, IMHO.
But what is a Praetorian Officer to do? (Especially one such as I that has limited funds). Well, I pondered and pondered this very question, with little success in nearling an answer, until one day I was cleaning out my shed. Going through some of my old gaming stuff, I happened across some books for the Space 1899 RPG. And there in my dusty and disorganized shed, I had an epiphany, in the form of the Aphid-Class anti-Grav gunboat.
I put my over-ambitious imagination to work, and tested my meager scratch-building talents to their fullest. Before you is the result: The HMAS Dauntless, a Chard-Class Anti-Grav Assault Airship. (Sorry for the Rourke's Drift reference - I couldn't resist).
The Dauntless is currently equipped as a Vendetta-Equivalent, although throught the use of magnets, I will be able to do weapon swaps to configure it as either a Vendetta or a Valkyrie, once I purchase the right bitz.
As Equipped, it matches a standard Vendetta: (3) Twin-Linked Las Cannons, (2) Heavy Bolters (aka Door-Gunners) and a 12-Man Squad carrying capacity.
The crew of the Dauntless is N+1 over the standard Vendetta: Helm, Gunner and (2) door-gunners, with the additional crew member being the Captain (in his spiffy trench coat).
Hello. It has been a long time between updated, and for that I am sorry. Work and family have been keeping me from blogging as consistantly as I would hope. But I still have been making time to paint and convert. This is one on my recent WIP's; a scratch-built Armoured Staff Car, to serve as the command vehicle for my Armoured detachment.
The Design was inspired by and based upon (very loosly) the 1920 Rolls-Royce Armoured Car imployed by the British Army during the latter parts of WWI, thru the interem years and into the early years of WWII.
I quickly formulated a plan (the proverbial sketch on a napkin), developed a template using AutoCAD to form a card-stock base. Heavier cardboard was cut and added for doors, armour plating, etc, with some 40K bits added for effect. The (6) wheels are SM Bike wheels. The turrent was created using a couple of washer, a wine bottle cork and a spare plastic heavy bolter.
I will post again once this is painted up. Thanks for looking!